SHINESTAR STEEL GROUP CO., LTD

盛仕达钢铁股份有限公司

Technical Requirement for Welded Steel Pipe

According to the API/ASTM standards, there are many technical requirements for producing welded steel pipe.

The nominal pipe diameter ranges from 6-150mm, nominal wall thickness ranges from 2.0-6.0mm and the length of the pipe is usually from 4 to 10. The pipe surface should be smooth, no collapse, no cracks, no lamination, and no lap welding defects exist. The wall thickness is not allowed to over the deviation, no scratches, no weld dislocation, no burns and scarring and other minor defects.

Welded steel pipe should perform mechanical test, flattening test and flaring test to achieve the standard requirements. 2.5Mpa internal pressure test is allowed to keep over 1minue without leakage. It allows use eddy current testing method instead of the hydrostatic test. After the eddy current testing, welded steel pipe will be cut to a predetermined length by flying saw and then flip-off from the assembly line. Then both ends of the pipe should be flat head chamfer, painting, marking and hexagonal packing before delivery.


Post time: May-26-2020

We use cookies to offer a better browsing experience, analyze site traffic, and personalize content. By using this site, you agree to our use of cookies.

Accept