Home » News » Product News » Epoxy Coated Pipe: FBE Outer Coating, Liquid Epoxy Liner, And Dual Epoxy System

Epoxy Coated Pipe: FBE Outer Coating, Liquid Epoxy Liner, And Dual Epoxy System

Views: 0     Author: Site Editor     Publish Time: 2026-11-17      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
sharethis sharing button

Epoxy-coated steel pipes provide effective corrosion protection for industrial, municipal, marine, and oil and gas pipeline systems. Common configurations include FBE outer coating, liquid epoxy internal lining, and dual epoxy coating systems. FBE outer coating is a powder-based fusion-bonded epoxy applied to the external surface, offering strong protection against soil moisture, chemicals, and underground corrosion. Liquid epoxy lining is applied internally to reduce corrosion from water, industrial fluids, and compatible media. A dual epoxy system combines external FBE coating with internal liquid epoxy lining for protection on both surfaces. Selection should be based on steel grade, pipe diameter, wall thickness, coating thickness, adhesion, chemical resistance, operating temperature, and installation conditions. This article compares the manufacturing processes, technical characteristics, applications, and quality inspection requirements of these three systems to help engineers and buyers choose suitable epoxy-coated pipes.

What Is FBE Outer Coating?

Fusion-bonded epoxy (FBE) outer coating is a popular external anti-corrosion system for steel pipes. Thermosetting epoxy powder is applied to the pipe exterior under controlled heating and curing. Once cured, it forms a continuous barrier that blocks moisture, oxygen and corrosive agents from reaching the steel substrate.

FBE-coated steel pipes are widely used for buried oil & gas pipelines, water transmission lines, industrial piping and qualified marine projects. High corrosion resistance and strong adhesion make it ideal for harsh pipeline environments.

FBE Manufacturing Process

Step

Brief Description

Surface Preparation

Abrasive blasting removes rust, mill scale, oil and contaminants for reliable adhesion

Pipe Heating

Steel pipe is heated to the temperature required by the epoxy formula

Powder Application

Epoxy powder is sprayed electrostatically onto the hot pipe surface

Melting & Curing

Powder melts, spreads and cures to form a solid protective film

Cooling & Inspection

Cool finished pipes are checked for thickness, adhesion, appearance and defects

Process parameters vary by epoxy grade, pipe size and project specifications.

Core Characteristics of FBE Outer Coating

Feature

Details

Excellent Corrosion Resistance

Blocks moisture and corrosive chemicals in soil or seawater

Strong Adhesion

Firmly bonds to properly blasted steel, lowering peeling risk

Uniform Coverage

Factory application delivers consistent coating thickness

Good Chemical Resistance

Resists many chemicals, subject to epoxy formulation

Mechanical Strength

Offers basic impact and abrasion resistance; test for heavy HDD pullback

Long Service Life

Extends pipeline lifespan and cuts maintenance with proper application & handling

Typical Applications of FBE-Coated Steel Pipes

Application Sector

Usage Notes

Oil & Gas Transmission

Protect buried pipelines from damp and corrosive soil

Underground Water Pipelines

External corrosion protection for buried water steel pipes

Industrial Piping

Suitable for industrial lines requiring external corrosion control

Marine & Coastal Engineering

Allowed for designated marine pipelines; often paired with cathodic protection or multi-layer systems for submerged service

HDD Projects

Must be assessed for abrasion, impact and pulling force resistance before use

What Is a Liquid Epoxy Pipe Liner?

A liquid epoxy pipe liner is an internal protective coating for steel pipe interiors. Made of epoxy resin, it is applied in liquid state and cured into a seamless protective film. It separates steel substrates from conveyed fluids to prevent internal corrosion and extend pipe service life.

It is widely used for water supply lines, industrial piping, marine works and qualified chemical transport. Unlike external FBE coating for pipe outer surfaces, this epoxy lining targets inner wall protection. Its performance relies on formula, surface prep, application, curing and medium compatibility.

Definition & Application Process

Liquid epoxy coating is mostly applied in controlled factories for uniform inner coverage. Standard steps are listed below:

Step

Brief Description

Internal Surface Preparation

Remove rust, scale, oil and dust; abrasive blasting if required by specs

Coating Preparation

Mix epoxy resin & hardener following manufacturer ratio and conditions

Internal Coating Application

Spray liquid epoxy evenly on pipe inner walls with approved spraying tools

Curing

Cure coated pipes under controlled conditions to form solid protective film

Final Inspection

Test coating thickness, appearance, adhesion and pinholes per project specs

Application methods change based on pipe diameter, length, epoxy formula and production equipment.

Key Features of Liquid Epoxy Pipe Liner

Feature

Details

Internal Anti-Corrosion

Forms barrier between steel and conveyed fluid to reduce corrosion

Chemical Resistance

Resists selected acids, alkalis, salts & industrial fluids; verify medium compatibility first

Smooth Inner Wall

Low surface roughness to maintain stable fluid flow efficiency

Strong Adhesion

Bonds tightly to steel with proper surface treatment and curing

Flexible Installation

Fits different pipe sizes and inner geometries with matched spraying equipment

Lower Maintenance

Cuts corrosion-related repairs and lengthens pipeline lifespan

For potable water pipelines, the lining must meet local health & safety standards.

Typical Applications of Liquid Epoxy Lined Steel Pipe

Application Field

Usage Notes

Water Supply Pipelines

Municipal & industrial water transmission; potable water grade needs official certification

Industrial Fluid Lines

Protect bare steel from corrosive fluids and sediment buildup

Marine Engineering

Seawater intake & outfall piping; formula for long-term seawater exposure

Chemical Process Piping

For qualified chemical media; check fluid concentration, temperature and exposure duration

Core Selection Factors

When sourcing liquid epoxy-lined steel pipes, evaluate conveyed medium, working temperature, pressure, coating thickness, adhesion requirements and relevant industry standards. Mandatory quality checks include visual inspection, thickness testing and holiday (pinhole) detection if specified.

What Is a Dual Epoxy Coating System?

A dual epoxy coating system is a steel‑pipe anti‑corrosion solution combining external Fusion‑Bonded Epoxy (FBE) powder coating and internal liquid epoxy lining. Unlike single‑sided coatings that only protect one pipe surface, it delivers full‑range corrosion resistance for both inner and outer walls.

This solution fits projects facing both internal‑fluid and external‑environmental corrosion risks. Outer FBE shields steel against soil moisture and outdoor corrosion; inner liquid epoxy isolates pipe steel from conveyed media. Dual‑epoxy steel pipes are widely used in water transfer, industrial piping and marine projects. Overall performance depends on coating quality, material compatibility and project specifications.

Structure & Protection Mechanism

A complete dual epoxy coating system contains three core components. Both coating workflows demand strict surface preparation, controlled application and quality checks to match service conditions.

Component

Core Function

Steel Pipe Substrate

Provides structural strength and pressure resistance; pipe grade, diameter and wall thickness are selected per project demands

External FBE Coating

Powder‑based epoxy applied via heating & curing; defends outer pipe wall from soil, moisture and ambient corrosion

Internal Liquid Epoxy Lining

Liquid epoxy cures into seamless inner film; blocks corrosion triggered by transported fluids

Main Advantages of Dual Epoxy Coating System

Advantage

Brief Explanation

Dual‑Sided Corrosion Resistance

Protect both inner and outer steel surfaces against corrosive elements

Enhanced Service Lifespan

Minimizes corrosion‑driven degradation and extends pipeline working life

Lower Maintenance Cost

Reduces repair frequency caused by coating damage or pipe rust

Broad Application Flexibility

Works for various pipe sizes under defined coating specification limits

Customizable Performance

Inner / outer coating grades can be adjusted for conveyed fluid and surrounding environment

Note: Dual epoxy coating cannot eliminate all corrosion risks. Demanding subsea conditions still need extra measures such as cathodic protection.

Typical Applications of Dual Epoxy‑Coated Steel Pipes

Application Scenario

Key Remarks

Water Transmission Pipelines

Municipal & industrial water transport; potable‑water use requires certified inner lining

Industrial Pipeline Networks

For water and compatible process fluids; protects inner medium contact surface plus outer pipe body

Marine Engineering

Resists seawater and salt‑humidity corrosion; submerging / offshore pipelines may need extra protective layers

Underground Buried Pipelines

Outer FBE resists soil moisture & soil chemicals; inner lining insulates steel from transported fluids

Quality Control & Selection Considerations

Buyers must verify quality for both coating layers when sourcing dual epoxy coated steel pipes. Mandatory inspection items: surface preparation grade, coating thickness, adhesion test, holiday detection and visual check.

Key selection criteria:

  1. Inner lining chemical compatibility with transported medium

  2. External FBE suitability for local soil and surrounding environment

  3. Pipe dimensions, steel grade, working pressure, working temperature and compliance with relevant industry standards

FBE Outer Coating vs. Liquid Epoxy Liner vs. Dual Epoxy System

FBE outer coating, liquid epoxy liner and dual epoxy system are three mainstream epoxy anti-corrosion solutions for steel pipes. Though all use epoxy materials, they differ in coating position, application workflow, protective purpose and applicable service environments.

Knowing these distinctions helps engineers, contractors and buyers pick suitable epoxy coated steel pipes for water transfer, oil & gas, marine and industrial pipeline projects.

Core Comparison of Three Coating Systems

The primary difference lies in which pipe surface is protected.

  • FBE outer coating: Coated externally to resist soil moisture and outside corrosion

  • Liquid epoxy liner: Coated internally to stop corrosion from conveyed fluids

  • Dual epoxy system: Integrates outer FBE and inner liquid epoxy for full-side protection

Comparison Item

FBE Outer Coating

Liquid Epoxy Liner

Dual Epoxy System

Coating Location

Pipe outer surface

Pipe inner surface

Inner + outer surfaces

Raw Material

Epoxy powder

Liquid epoxy resin

FBE powder + liquid epoxy

Application Process

Heating, powder spraying & curing

Liquid coating & curing

Combination of both processes

Protection Focus

External corrosion

Internal corrosion

Internal & external corrosion

Typical Uses

Buried pipelines, oil & gas lines

Water & industrial fluid pipelines

Water & industrial pipelines with dual corrosion risks

Key Selection Factor

Soil & ambient environment

Fluid chemical compatibility

Both inner and outer protection demands

Advantages & Limitations

Coating Type

Advantages

Limitations

FBE Outer Coating

Strong adhesion, stable factory quality, reliable outer anti-corrosion

No inner protection; extra lining needed for corrosive media

Liquid Epoxy Liner

Good inner corrosion barrier, flexible coating for bore surfaces

Cannot protect pipe exterior; formula must match medium & temperature

Dual Epoxy System

Combines merits of FBE and liquid epoxy; full internal & external shielding

Extra coating steps and inspections; higher cost than single coating

Selection Guide for Epoxy Coating Systems

Choose based on actual pipeline working conditions instead of price only.

Project Condition

Recommended Option

Reason

Buried pipeline, low internal corrosion risk

FBE outer coating

Prioritize external corrosion control

Water / compatible industrial fluid transport

Liquid epoxy liner

Protect pipe inner wall from conveyed media

Facing both internal and external corrosion threats

Dual epoxy system

Offers full two-sided anti-corrosion

General marine pipelines

FBE or dual epoxy system

Subject to seawater exposure and inner fluid properties

Industrial pipelines carrying corrosive compatible fluids

Liquid epoxy or dual epoxy system

Depends on outer corrosion severity

Notes for special scenarios: Marine projects need assessment for seawater, temperature, chemical compatibility and cathodic protection. HDD and buried pipelines require outer coating with high mechanical damage resistance.

Cost & Long-Term Performance Notes

Single-side FBE or liquid epoxy lining is more cost-effective when only one surface needs protection. The dual epoxy system involves more manufacturing and inspection work, yet it delivers value if both inner and outer corrosion protection is mandatory.

When evaluating quotations, buyers should check coating quality, service conditions, maintenance cycle and future repair expenses. Low upfront cost does not guarantee the lowest total project cost.

Technical Specifications and Quality Inspection

Technical specs and quality inspection are critical when sourcing epoxy-coated steel pipes. Whether using FBE outer coating, internal liquid epoxy lining or dual epoxy systems, both steel substrate and coating must satisfy project engineering standards.

Different pipeline projects have unique demands for pressure rating, temperature resistance, chemical compatibility and anti-corrosion performance. Buyers need to confirm steel pipe parameters and coating performance before production and shipment.

Key Steel Pipe Substrate Specifications

The steel base determines structural strength and pressure-bearing capacity. Core parameters are listed below:

  1. Steel Grade: Select carbon steel grades based on working pressure, temperature and service conditions, complying with project and manufacturing standards.

  2. Pipe Dimensions: OD, wall thickness and length; confirm before ordering to match installation design.

  3. Manufacturing Standard: Common standards include API 5L, ASTM, etc. Distinguish pipe substrate standards from coating specifications.

  4. Operating Conditions: Working pressure, temperature, conveyed medium and installation environment guide material and coating selection.

Coating Technical Requirements

Parameter

FBE Outer Coating

Liquid Epoxy Liner

Dual Epoxy System

Coating Location

Pipe outer surface

Pipe inner surface

Inner + outer surfaces

Coating Thickness

As per project specs

As per project specs

Separate thickness limits for each layer

Adhesion Requirement

Outer coating adhesion test

Inner lining adhesion test

Both layers must pass adhesion requirements

Corrosion Resistance Target

External surrounding environment

Transported fluid

Internal fluid & external environment

Compatibility Focus

Soil, moisture, field installation

Fluid composition & operating temperature

Both inner and outer service conditions

Coating thickness must follow selected standards. Too thin coating offers insufficient protection; excessively thick coating may trigger application defects.

Surface Preparation & Application Inspection

Surface preparation heavily decides final coating performance. Steel surfaces must be cleaned of rust, oil, dust and mill scale before coating. Abrasive blasting is widely adopted to reach required cleanliness and surface profile.

Manufacturers control these key parameters during coating:

  • Steel preheat / surface temperature

  • Coating mixing and application conditions

  • Curing temperature & holding time

  • Coating thickness and uniformity

  • Ambient environmental conditions

For FBE coating, controlled pipe heating and powder spraying are vital. For liquid epoxy lining, accurate mixing, spraying and curing form a seamless protective film.

Common Quality Inspection Methods

Inspection Item

Purpose

Visual Inspection

Check cracks, blisters, peeling, scratches and uneven coverage

Coating Thickness Test

Verify thickness meets specified values with thickness gauges

Adhesion Test

Check bonding strength between epoxy layer and steel substrate

Holiday Detection

Locate pinholes and coating discontinuities; test voltage matches coating thickness

Impact & Abrasion Resistance Test

Assess resistance to mechanical damage, suitable for HDD and rough handling scenarios

Applicable Standards & Quality Documents

Standard

Coverage

ISO 21809 Series

External anti-corrosion coatings for oil & gas steel pipelines

AWWA C213

FBE coating for inner and outer surfaces of steel water pipelines

API 5L

Line pipe substrate standard (not for epoxy coating)

Applications and Selection Guide for Different Pipeline Projects

Epoxy-coated steel pipes are widely used for anti-corrosion pipeline projects. Different industries have unique requirements for coating performance, chemical resistance, working pressure and installation conditions. FBE outer coating, liquid epoxy liner and dual epoxy systems deliver different protection solutions. The selection depends on service environment, conveyed media and working conditions.

Underground Oil & Gas Pipelines

Buried oil and gas pipelines face soil moisture and corrosive soil substances. External anti-corrosion is critical. FBE outer coating is the common choice for buried steel pipes, featuring strong adhesion and reliable outer corrosion resistance. If the conveyed medium triggers internal corrosion, add liquid epoxy lining or other inner protection. Check fluid composition, temperature, pressure and relevant standards before final selection.

Water Supply & Municipal Pipelines

Municipal water pipelines need stable inner and outer anti-corrosion performance. Liquid epoxy liner guards inner walls against water corrosion and offers a smooth bore for efficient flow. FBE outer coating protects buried pipes from soil corrosion. Dual epoxy coating is ideal when both inner and outer protection are required. For potable water service, the inner epoxy lining must meet local health certifications.

Marine & Coastal Engineering

Marine pipelines suffer from seawater, salt spray and high humidity. Typical uses include seawater intake/outfall, port and coastal utility piping. FBE coating provides outer protection; liquid epoxy liner protects inner walls for seawater or compatible media. Dual epoxy systems are available for dual-side corrosion risks. Fully submerged or offshore pipelines usually need extra protection such as cathodic protection or multi-layer coatings.

Industrial & Chemical Pipelines

Industrial pipelines carry water, process liquids and chemicals with varying corrosivity. Liquid epoxy lining works for inner protection only if the epoxy formula is compatible with the medium. FBE coating adds outer protection for corrosive external environments. Engineers must verify these factors for chemical service: chemical concentration, operating temperature, pressure, exposure time and coating chemical resistance. Confirm medium compatibility with the coating supplier.

Epoxy Coating Selection Table

Pipeline Application

Recommended Coating Option

Key Considerations

Underground oil & gas pipelines

FBE outer coating / dual epoxy system

Soil corrosion + internal fluid corrosivity

Municipal water pipelines

Liquid epoxy liner / dual epoxy system

Water safety approval and external corrosion

Marine utility pipelines

FBE / liquid epoxy liner / dual epoxy system

Seawater exposure and service conditions

Industrial fluid pipelines

Liquid epoxy liner / dual epoxy system

Chemical resistance and temperature limit

Buried industrial pipelines

FBE outer coating / dual epoxy system

Soil condition and internal medium compatibility

Extra selection notes: Also evaluate steel grade, OD, wall thickness, coating thickness, installation method, inspection rules and total project cost. For HDD installations, outer coating abrasion and impact resistance are essential. Marine projects need assessment for seawater and cathodic protection matching.

Conclusion:

Epoxy-coated steel pipes provide reliable corrosion protection for oil and gas, municipal water, marine, and industrial pipeline systems. FBE outer coating protects the external surface against soil moisture and environmental corrosion, making it suitable for underground and selected marine applications. Liquid epoxy lining protects the internal surface from corrosion caused by water, industrial fluids, and compatible media, with formulation and compliance confirmed for the intended service. Dual epoxy systems combine external FBE coating and internal liquid epoxy lining for projects requiring protection on both surfaces. Selection should be based on pipeline application, coating configuration, steel grade, pipe dimensions, coating thickness, adhesion, chemical compatibility, mechanical resistance, installation conditions, and quality inspection. Buyers should clearly specify both pipe manufacturing standards and coating standards in the purchase contract.

FAQ:

1. What is the difference between FBE coating and liquid epoxy coating?

FBE coating is an epoxy powder applied to the external pipe surface and cured with heat. Liquid epoxy is applied in liquid form, commonly as an internal lining, and then cured.

2. What is a dual epoxy coated steel pipe?

It is a steel pipe with external FBE coating and internal liquid epoxy lining, providing corrosion protection on both surfaces.

3. Is FBE coating suitable for underground steel pipelines?

Yes. FBE coating provides external corrosion protection against soil moisture and other corrosive conditions when properly applied and specified.

4. Can liquid epoxy lining be used for drinking-water pipes?

Yes, provided the selected lining meets the relevant drinking-water safety and regulatory requirements in the destination market.

5. When should buyers choose a dual epoxy coating system?

A dual epoxy system is suitable when both internal and external corrosion protection are required, such as in certain water transmission and industrial pipeline projects.

Quick Links

Products

Contact Us

Telephone

+86 0731 8867 2086

Address

No.9 Xiangfu Rd, Yuhua District, Changsha, China.

Get Touch With Us

​Copyright © SHINESTAR STEEL GROUP CO., LTD. All Rights Reserved.