غلاف is a large-diameter pipe that serves as the structural retainer for the walls of oil and gas wells, or well bore.It is inserted into a well bore and cemented in place to protect both subsurface formations and the well bore from collapsing and to allow drilling fluid to circulate and extraction to take place. Steel Casing Pipes have smooth wall & minimum yield strength of 35,000 psi.
Well Casing serves as well sidewall. Standards and Technical Conditions for Supply:API Spec 5CT ISO13680 Grade: J55, K55, N80-1,N80-Q, L80-1, L80-9Cr,L80-13Cr,C95, P110. Tread types: NUE, EUE, VAM, STC, LTC, BTC, special clearance, XC,VAM TOP,NEW VAM.
Oil Casing Pipe: Casings are used for fixing the well wall or down hole, which have wide diameters, can be divided into conductor casings, technical casings and Oil casings.
Uses: Well Casing serves as well sidewall.
Standards and Technical Conditions for Supply: API Spec 5CT
Grade of pipe casing: J55, K55, N80-1,N80-Q, L80-1, L80-9Cr,L80-13Cr,C95, P110.
Tread types of pipe casing : STC, LTC, BTC, special clearance, XC,VAM TOP,NEW VAM.
Dimension: OD: 114.3-508mm WT: 5.21-16.13mm
What is API 5CT casing ?
API SPEC 5CT well casing is utilized in fixing the well wall or down hole, which has wider diameters. API SPEC 5CT can be divided into conductor casing, technical casing and oil casing.
API 5CT is standard technical specifications for steel casing pipes used for oil wells in petroleum and natural gas industries.
Common Grades
• J55/K55
• N80/N80Q/L80
• C90
• R95/T95
• P110/C110
• Q125
Connections
API 5CT is applicable to following connections which complied with API SPEC 5B:
• SC: Short round thread casing
• LC: Long ound thread casing
• BC: Buttress thread casing
• NU: Non-upset tubing
• EU: External upset tubing
• IJ: Integral tubing connections
أطوال:
الغلاف النفط |
مجموعة 1 |
مجموعة 2 |
مجموعة 3 |
4.88 ~ 7.62 |
7.62 ~ 10.36 |
10.36 14.63 ~ |
البعد:
ملصقات |
خارج القطر D |
الاسمية الكتلة الخطية T & C |
سمك الجدار ر |
J55 |
N80 |
L80 |
C90 |
P110 |
Q125 |
|
مم |
كجم / م |
مم |
K55 |
1 / Q؟ |
T95 |
|||||
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
4 1/2 |
9.5 |
114.3 |
14.14 |
5.21 |
PS |
- |
- |
- |
- |
- |
4 1/2 |
10.5 |
114.3 |
15.63 |
5.69 |
PSB |
- |
- |
- |
- |
- |
4 1/2 |
11.6 |
114.3 |
17.26 |
6.35 |
PSLB |
PLB |
PLB |
PLB |
PLB |
- |
4 1/2 |
13.5 |
114.3 |
20.09 |
7.37 |
- |
PLB |
PLB |
PLB |
PLB |
- |
4 1/2 |
15.1 |
114.3 |
22.47 |
8.56 |
- |
- |
- |
- |
PLB |
PLB |
5 |
11.5 |
127 |
17.11 |
5.59 |
PS |
- |
- |
- |
- |
- |
5 |
13 |
127 |
19.35 |
6.43 |
PSLB |
- |
- |
- |
- |
- |
5 |
15 |
127 |
22.32 |
7.52 |
PSLBE |
PLBE |
PLBE |
PLBE |
PLBE |
- |
5 |
18 |
127 |
26.79 |
9.19 |
- |
PLBE |
PLBE |
PLBE |
PLBE |
PLBE |
5 |
21.4 |
127 |
31.85 |
11.1 |
- |
PLB |
PLB |
PLB |
PLB |
PLB |
5 |
23.2 |
127 |
34.53 |
12.14 |
- |
PLB |
PLB |
PLB |
PLB |
PLB |
5 |
24.1 |
127 |
35.86 |
12.7 |
- |
PLB |
PLB |
PLB |
PLB |
PLB |
5 1/2 |
14 |
139.7 |
20.83 |
6.2 |
PS |
- |
- |
- |
- |
- |
5 1/2 |
15.5 |
139.7 |
23.07 |
6.98 |
PSLBE |
- |
- |
- |
- |
- |
5 1/2 |
17 |
139.7 |
25.3 |
7.72 |
PSLBE |
PLBE |
PLBE |
PLBE |
PLBE |
- |
5 1/2 |
20 |
139.7 |
29.76 |
9.17 |
- |
PLBE |
PLBE |
PLBE |
PLBE |
- |
5 1/2 |
23 |
139.7 |
34.23 |
10.54 |
- |
PLBE |
PLBE |
PLBE |
PLBE |
PLBE |
5 1/2 |
26.8 |
139.7 |
39.88 |
12.7 |
- |
- |
- |
P |
- |
- |
5 1/2 |
29.7 |
139.7 |
44.2 |
14.27 |
- |
- |
- |
P |
- |
- |
5 1/2 |
32.6 |
139.7 |
48.51 |
15.88 |
- |
- |
- |
P |
- |
- |
5 1/2 |
35.3 |
139.7 |
52.53 |
17.45 |
- |
- |
- |
P |
- |
- |
5 1/2 |
38 |
139.7 |
56.55 |
19.05 |
- |
- |
- |
P |
- |
- |
5 1/2 |
40.5 |
139.7 |
60.27 |
20.62 |
- |
- |
- |
P |
- |
- |
5 1/2 |
43.1 |
139.7 |
64.14 |
22.22 |
- |
- |
- |
P |
- |
- |
6 5/8 |
20 |
168.28 |
29.76 |
7.32 |
PSLB |
- |
- |
- |
- |
- |
6 5/8 |
24 |
168.28 |
35.72 |
8.94 |
PSLBE |
PLBE |
PLBE |
PLBE |
PLBE |
- |
6 5/8 |
28 |
168.28 |
41.67 |
10.59 |
- |
PLBE |
PLBE |
PLBE |
PLBE |
- |
6 5/8 |
32 |
168.28 |
47.62 |
12.06 |
- |
PLBE |
PLBE |
PLBE |
PLBE |
PLBE |
7 |
17 |
177.8 |
25.3 |
5.87 |
- |
- |
- |
- |
- |
- |
7 |
20 |
177.8 |
29.76 |
6.91 |
PS |
- |
- |
- |
- |
- |
7 |
23 |
177.8 |
34.23 |
8.05 |
PSLBE |
PLBE |
PLBE |
PLBE |
- |
- |
7 |
26 |
177.8 |
38.69 |
9.19 |
PSLBE |
PLBE |
PLBE |
PLBE |
PLBE |
- |
7 |
29 |
177.8 |
43.16 |
10.36 |
- |
PLBE |
PLBE |
PLBE |
PLBE |
- |
7 |
32 |
177.8 |
47.62 |
11.51 |
- |
PLBE |
PLBE |
PLBE |
PLBE |
- |
7 |
35 |
177.8 |
52.09 |
12.65 |
- |
PLBE |
PLBE |
PLBE |
PLBE |
PLBE |
7 |
38 |
177.8 |
56.55 |
13.72 |
- |
PLBE |
PLBE |
PLBE |
PLBE |
PLBE |
7 |
42.7 |
177.8 |
63.54 |
15.88 |
- |
- |
- |
P |
- |
- |
7 |
46.4 |
177.8 |
69.05 |
17.45 |
- |
- |
- |
P |
- |
- |
7 |
50 |
177.8 |
74.56 |
19.05 |
- |
- |
- |
P |
- |
- |
7 |
53.6 |
177.8 |
79.77 |
20.62 |
- |
- |
- |
P |
- |
- |
7 |
57.1 |
177.8 |
84.97 |
22.22 |
- |
- |
- |
P |
- |
- |
7 5/8 |
24 |
193.68 |
35.72 |
7.62 |
- |
- |
- |
- |
- |
- |
7 5/8 |
26.4 |
193.68 |
39.29 |
8.33 |
PSLBE |
PLBE |
PLBE |
PLBE |
- |
- |
7 5/8 |
29.7 |
193.68 |
44.2 |
9.52 |
- |
PLBE |
PLBE |
PLBE |
PLBE |
- |
7 5/8 |
33.7 |
193.68 |
50.15 |
10.92 |
- |
PLBE |
PLBE |
PLBE |
PLBE |
- |
7 5/8 |
39 |
193.68 |
58.04 |
12.7 |
- |
PLBE |
PLBE |
PLBE |
PLBE |
PLBE |
7 5/8 |
42.8 |
193.68 |
63.69 |
14.27 |
- |
PLB |
PLB |
PLB |
PLB |
PLB |
7 5/8 |
45.3 |
193.68 |
67.41 |
15.11 |
- |
PLB |
PLB |
PLB |
PLB |
PLB |
7 5/8 |
47.1 |
193.68 |
70.09 |
15.88 |
- |
PLB |
PLB |
PLB |
PLB |
PLB |
7 5/8 |
51 |
193.68 |
76.19 |
17.45 |
- |
- |
- |
P |
- |
- |
7 5/8 |
55.3 |
193.68 |
82.3 |
19.05 |
- |
- |
- |
P |
- |
- |
8 5/8 |
24 |
219.08 |
35.72 |
6.71 |
PS |
- |
- |
- |
- |
- |
8 5/8 |
28 |
219.08 |
41.67 |
7.72 |
- |
- |
- |
- |
- |
- |
8 5/8 |
32 |
219.08 |
47.62 |
8.94 |
PSLBE |
- |
- |
- |
- |
- |
8 5/8 |
36 |
219.08 |
53.57 |
10.16 |
PSLBE |
PLBE |
PLBE |
PLBE |
- |
- |
8 5/8 |
40 |
219.08 |
59.53 |
11.43 |
- |
PLBE |
PLBE |
PLBE |
PLBE |
- |
8 5/8 |
44 |
219.08 |
65.48 |
12.7 |
- |
PLBE |
PLBE |
PLBE |
PLBE |
|
8 5/8 |
49 |
219.08 |
72.92 |
14.15 |
- |
PLBE |
PLBE |
PLBE |
PLBE |
PLBE |
9 5/8 |
32 |
244.48 |
48.07 |
7.92 |
- |
- |
- |
- |
- |
- |
9 5/8 |
36 |
244.48 |
53.57 |
8.94 |
PSLB |
- |
- |
- |
- |
- |
9 5/8 |
40 |
244.48 |
59.53 |
10.03 |
PSLBE |
PLBE |
PLBE |
PLBE |
- |
- |
9 5/8 |
43.5 |
244.48 |
64.73 |
11.05 |
- |
PLBE |
PLBE |
PLBE |
PLBE |
- |
9 5/8 |
47 |
244.48 |
69.94 |
11.99 |
- |
PLBE |
PLBE |
PLBE |
PLBE |
PLBE |
9 5/8 |
53.5 |
244.48 |
79.62 |
13.84 |
- |
PLBE |
PLBE |
PLBE |
PLBE |
PLBE |
9 5/8 |
58.4 |
244.48 |
86.91 |
15.11 |
- |
PLB |
PLB |
PLB |
PLB |
PLB |
9 5/8 |
59 |
244.48 |
88.4 |
15.47 |
- |
- |
- |
P |
- |
- |
9 5/8 |
64.9 |
244.48 |
96.58 |
17.07 |
- |
- |
- |
P |
- |
- |
9 5/8 |
70.3 |
244.48 |
104.62 |
18.64 |
- |
- |
- |
P |
- |
- |
9 5/8 |
75.6 |
244.48 |
112.5 |
20.24 |
- |
- |
- |
P |
- |
- |
10 3/4 |
32.75 |
273.05 |
48.74 |
7.09 |
- |
- |
- |
- |
- |
- |
10 3/4 |
40.5 |
273.05 |
60.27 |
8.89 |
PSB |
- |
- |
- |
- |
- |
10 3/4 |
45.5 |
273.05 |
67.71 |
10.16 |
PSBE |
- |
- |
- |
- |
- |
10 3/4 |
51 |
273.05 |
75.9 |
11.43 |
PSBE |
PSBE |
PSBE |
PSBE |
PSBE |
- |
10 3/4 |
55 |
273.05 |
82.59 |
12.57 |
- |
PSBE |
PSBE |
PSBE |
PSBE |
- |
10 3/4 |
60.7 |
273.05 |
90.33 |
13.84 |
- |
- |
- |
PSBE |
PSBE |
PSBE |
10 3/4 |
65.7 |
273.05 |
97.77 |
15.11 |
- |
- |
- |
PSB |
PSB |
PSB |
10 3/4 |
73.2 |
273.05 |
108.93 |
17.07 |
- |
- |
- |
P |
- |
- |
10 3/4 |
79.2 |
273.05 |
117.86 |
18.64 |
- |
- |
- |
P |
- |
- |
10 3/4 |
85.3 |
273.05 |
126.94 |
20.24 |
P |
|||||
11 3/4 |
42 |
298.45 |
62.5 |
8.46 |
- |
- |
- |
- |
- |
- |
11 3/4 |
47 |
298.45 |
69.94 |
9.53 |
PSB |
- |
- |
- |
- |
- |
11 3/4 |
54 |
298.45 |
80.36 |
11.05 |
PSB |
- |
- |
- |
- |
- |
11 3/4 |
60 |
298.45 |
89.29 |
12.42 |
PSB |
PSB |
PSB |
PSB |
PSB |
PSB |
11 3/4 |
65 |
298.45 |
96.73 |
13.56 |
- |
P |
P |
P |
P |
P |
11 3/4 |
71 |
298.45 |
105.66 |
14.78 |
- |
P |
P |
P |
P |
P |
13 3/8 |
48 |
339.72 |
71.43 |
8.38 |
- |
- |
- |
- |
- |
- |
13 3/8 |
54.5 |
339.72 |
81.1 |
9.65 |
PSB |
- |
- |
- |
- |
- |
13 3/8 |
61 |
339.72 |
90.78 |
10.92 |
PSB |
- |
- |
- |
- |
- |
13 3/8 |
68 |
339.72 |
101.19 |
12.19 |
PSB |
PSB |
PSB |
PSB |
PSB |
- |
13 3/8 |
72 |
339.72 |
107.15 |
13.06 |
- |
PSB |
PSB |
PSB |
PSB |
PSB |
16 |
65 |
406.4 |
96.73 |
9.53 |
- |
- |
- |
- |
- |
- |
16 |
75 |
406.4 |
111.61 |
11.13 |
PSB |
- |
- |
- |
- |
- |
16 |
84 |
406.4 |
125.01 |
12.57 |
PSB |
- |
- |
- |
- |
- |
16 |
109 |
406.4 |
162.21 |
16.66 |
P |
P |
P |
- |
P |
P |
18 5/8 |
87.5 |
473.08 |
130.21 |
11.05 |
PSB |
- |
- |
- |
- |
- |
20 |
94 |
508 |
139.89 |
11.13 |
PSLB |
- |
- |
- |
- |
- |
20 |
106.5 |
508 |
158.49 |
12.7 |
PSLB |
- |
- |
- |
- |
- |
20 |
133 |
508 |
197.93 |
16.13 |
PSLB |
- |
- |
- |
- |
- |
P - نهاية عادي. S - القصير موضوع مستديرة، L - طويل موضوع مستديرة، B - دعم موضوع، E - خط المدقع. |
الخصائص الميكانيكية:
مجموعة |
درجة |
نوع |
مجموع استطالة تحت الحمل٪ |
مقاومة الخضوع ميجا باسكال |
قوة الشد دقيقة ميغاباسكال |
صلابة ماكس |
||
دقيقة |
ماكس |
HRC |
HBW |
|||||
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
1 |
J55 |
- |
0.5 |
379 |
552 |
517 |
- |
- |
K55 |
- |
0.5 |
379 |
552 |
655 |
- |
- |
|
N80 |
1 |
0.5 |
552 |
758 |
689 |
- |
- |
|
N80 |
Q |
0.5 |
552 |
758 |
689 |
- |
- |
|
2 |
L80 |
1 |
0.5 |
552 |
655 |
655 |
23 |
241 |
L80 |
9CR |
0.5 |
552 |
655 |
655 |
23 |
241 |
|
L80 |
13Cr |
0.5 |
552 |
655 |
655 |
23 |
241 |
|
C90 |
1؟ 2 |
0.5 |
621 |
724 |
689 |
25.4 |
255 |
|
C95 |
- |
0.5 |
655 |
758 |
724 |
- |
- |
|
T95 |
1؟ 2 |
0.5 |
655 |
758 |
724 |
25.4 |
255 |
|
3 |
P110 |
- |
0.6 |
758 |
965 |
862 |
- |
- |
4 |
Q125 |
الكل |
0.65 |
862 |
1034 |
931 |
- |
- |
تفاوت
أنواع أنابيب الصلب |
القطر الخارجي |
سمك الحائط |
|
الأنابيب الباردة المدلفن |
أحجام أنبوب (مم) |
التحمل (مم) |
التحمل (مم) |
<114.3 |
± 0.79 |
-12.5% |
|
التركيب الكيميائي
اساسي | درجة | Chemical compositions(%) | |||||||||
API SPEC 5CT | J55 | C | سي | مليون | P | S | كر | ني | النحاس | مو | الخامس |
K55 | 0.34~0.39 | 0.20~0.35 | 1.25~1.50 | ≤0.020 | ≤0.015 | ≤0.15 | ≤0.20 | ≤0.20 | / | / | |
N80 | 0.34~0.38 | 0.20~0.35 | 1.45~1.70 | ≤0.020 | ≤0.015 | ≤0.15 | / | / | / | 0.11~0.16 | |
L80 | 0.15~0.22 | ≤1.00 | 0.25~1.00 | ≤0.020 | ≤0.010 | 12.0~14.0 | ≤0.20 | ≤0.20 | / | / | |
P110 | 0.26~0.395 | 0.17~0.37 | 0.40~0.70 | ≤0.020 | ≤0.010 | 0.80~1.10 | ≤0.20 | ≤0.20 | 0.15~0.25 | ≤0.08 |
خصائص ميكانيكية
درجة | نوع | مجموع استطالة تحت الحمل (٪) | مقاومة الخضوع (دقيقة) | قوة الغلة (كحد أقصى) | قوة الشد دقيقة ميجا باسكال | صلابة ماكس (HRC) | صلابة ماكس (HBW) |
J55 | - | 0.5 | 379 | 552 | 517 | - | - |
K55 | - | 0.5 | 379 | 552 | 655 | - | - |
N80 | 1 | 0.5 | 552 | 758 | 689 | - | - |
N80 | Q | 0.5 | 552 | 758 | 689 | - | - |
L80 | 1 | 0.5 | 552 | 655 | 655 | 23 | 241 |
L80 | 9CR | 0.5 | 552 | 655 | 655 | 23 | 241 |
L80 | 13Cr | 0.5 | 552 | 655 | 655 | 23 | 241 |
C90 | - | 0.5 | 621 | 724 | 689 | 25.4 | 255 |
C95 | - | 0.5 | 655 | 758 | 724 | - | - |
T95 | - | 0.5 | 655 | 758 | 724 | 25.4 | 255 |
P110 | - | 0.6 | 758 | 965 | 862 | - | - |
Q125 | الكل | 0.65 | 862 | 1034 | 931 | - | - |
Anti-Corrosion Water Based Paint