Shine STEEL GROUP CO., LTD

盛仕达 钢铁 股份有限公司

Industry News

  • Create a New Business Card of “Wisdom Made in China”

    Create a New Business Card of “Wisdom Made in China”

    The “super fishing grounds” of China’s 12-stage typhoon have been delivered to Norwegian users. The “super fishing grounds” installed more than 20000 various types of sensors,  integrated into the biology, engineering, electrical, computer and other multidisciplinary...
    Weiterlesen
  • Carbon Steel-Heat Treatment

    Carbon Steel-Heat Treatment

    ​The purpose of heat treating carbon steel is to change the mechanical properties of steel, usually ductility, hardness, yield strength, or impact resistance. Note that the electrical and thermal conductivity are only slightly altered. As with most strengthening techniques for steel, Young’...
    Weiterlesen
  • Hot dip process

    Hot dip process

    Hot dip process Workpiece → degreasing → ​​washing → pickling → ​​washing → dip test help plated solvent → drying Preheat galvanized → finishing → ​​hot dip → cooling → ​rinsing → drying →inspection Hot-dip galvanizing layer formation process Hot-dip galvanizing layer formation process is a proce...
    Weiterlesen
  • High strength structural steel plate of cold forming performance

    High strength structural steel plate of cold forming performance

    Inadequacies of high-strength steel structure is thermoformed and post-weld heat treatment temperature determination are limited material softening problem. Therefore, in practical applications in order to avoid affecting the thermoforming process on the mechanical properties of the material, the...
    Weiterlesen
  • Gas pipeline internal coating

    Gas pipeline internal coating

    Gas pipeline coating technology is a certain thickness of the pipe wall spray epoxy, not only avoid acidic gases in the transport pipe wall subject to corrosion, but also to prevent inclusion of other contaminants in the gas stream impurities deposited on the etched surface of the pipe wall side ...
    Weiterlesen
  • Expanding machine

    Expanding machine

    Expanding machine is straight seam welded metal shaping apparatus, it is bulged cone head, in the steel pipe dilatation, to eliminate the molding pressure and welded steel pipe stress, and to ensure that the full-length straight seam welded steel pipe diameter segment really the same size, equipm...
    Weiterlesen
  • Hot extrusion technology

    Hot extrusion technology

    Hot extrusion technology is a metal above the recrystallization temperature for extrusion, the billets extruded from a die orifice, to obtain the shape of the die hole metal forming method of the cross-sectional pipe. In the hot extrusion process (from the tube blank to the blank pipe), the tube ...
    Weiterlesen
  • Difference between pipeline welding and TIG welding backing

    Difference between pipeline welding and TIG welding backing

    Full TIG welding backing makes no difference in the process, the whole arc for thin-walled small diameter pipes (DN50 general and below, the wall thickness of 4 mm) or less, the purpose of guarantee good weld root quality appearance imaging. When a large diameter, thick wall thickness should be u...
    Weiterlesen
  • Degaussing pipes

    Degaussing pipes

    Residual magnetism causes and impact on quality of welding in the construction and repair of gas pipelines welding job, sometimes magnetic blow phenomena affect the welding process. Forming a magnetic blow is the result of the presence of residual magnetism of the tube metal. Typically, magnetic ...
    Weiterlesen
123Weiter> >> Page 1 / 3