Gemeinhin Hexagonal Schwer Serie Muttern mit Nieten verwendet. Die Nicht-Lagerfläche einer Mutter abgeschrägt ist, während die Lastlagerfläche mit einer Unterlegscheibe Fläche abgeschlossen ist, oder kann abgeschrägt sein.
Muttern können aus dem gleichen Material wie Bolzen bearbeitet werden oder von einem kompatiblen Grad von ASTM A194 sein kann,
ASTM A194 Standardlisten der kompatibelen Materialqualitäten für Muttern, die mit Bolzen & Bolzen verwendet.
Am häufigsten verwendete Material-Typen sind ASTM A194 Gr 2,2H, 2HM, 8,8M
What are Heavy Hex Nuts?
Heavy hex nuts are six-sided (hexagonal) internally threaded fasteners and larger versions of common/standard hex nuts. They are widely used for structural applications and because of this, heavy hex nuts are also known as structural nuts. Hex-heavy nuts are used for high-strength threaded fastening with large diameters. They are thicker and wider than standard hex nuts.
Similar to all other nuts, the heavy hex nuts are also used along with other fasteners mainly with a bolt to secure two or more materials together. To provide a long-lasting experience, heavy hex nuts are produced in zinc, plain, stainless steel, and galvanized finishes.
Paired with heavy hex bolts, these types of nuts are most common in construction and engineering applications. Hex-heavy nuts are available in various grades and selected based on the application.
Heavy Hex Nut Standards and Specifications
The most popular Heavy Hex nut standard is the ASME B18.2.2 which covers the complete general and dimensional data for the various types of inch series square and hex nuts. Widely used ASTM standards that cover the Heavey Hex Nuts are:
ASTM A194
ASTM A563
Heavy Hex Nut Dimensions
Heavy hex nut dimensions basically consist of three specific dimensions as listed below:
Nut thickness (T)
Width across flats (F), and
Width across corners (C)
Material | Kohlenstoffstahl und Edelstahl |
Größe | M3-M100; 1 / 4-4 " |
Standard | GB, GB / T, DIN, JIS, BSW, ANSI, ISO & Nicht-Standard-Produkte |
Oberfläche | Plain, Yellow Zink, schwarz phosphatiert, grau phosphatiert, Überzug Nickel |
Verpackung | Wie Sie forderten |
Spezifikationen | Verschiedene Form Größe entsprechend Anforderung des Kunden |
Professionel | Wir sind in der Hardware-Produkten spezialisiert und verfügen über mehr als 10 Jahre Erfahrung in diesem Bereich |
Bedienung | Wenn Sie Probleme haben oder Dienstleistungen über unsere Produkte lassen pls uns ohne Zögern wissen |
Material | 1. Stainless Steel: SUS201, SUS304, SUS316, SUS410 2. Carbon Steel:C1006,C1008,C1010,C1018,C1022,C10B21,C10B33,C1035,C1045, C435#,40CrMo,42CrMo 3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200CuZn37), C28000(CuZn40) 4. Bronze: C51000, C52100, C54400, etc 5. Aluminum: Al6061, Al6063 etc Aluminum Alloy: Al6061, Al6063 etc 6. Titanium and Titanium Alloy: TAD,TA1-TA8,TB2,TC1-TC10 7. Alloy steel: SCM435,C10B21,C10B33 8. Iron:1213,12L14,1215,etc |
|
Standard | DIN ISO GB JIS BA ANSI & SUS201, SUS304, SUS316, A2-70, A2-80, A4-80, 4,8 6,8 8,8, 10.9,12.9 | |
Größe | M3-M100; 1 / 4-4 " | |
Länge | Je nach Ihren Bedürfnissen | |
Farbe | schwarz, Farbe Zink, etc | |
Fertig | Plain, verzinktes (Clear / Blau / Gelb / Schwarz), brüniert, Nickel, grau Phosphat, Nickel, Ruspert, HDG, etc | |
Klasse | 4.8,8.8, A2, A4, etc. | |
Wärmebehandlung | Temperieren, Härten, spheroidizing, streßvermindernde | |
Spezifikation | Verschiedene Kopfform und Größen pro Ihre Anfrage | |
Beachten | Bitte wissen läßt, die Größe, Menge, Material oder Grade, Oberflächengüte, wenn es spezielle und Nicht-Standard-Produkte finden Sie in der Zeichnung oder Fotos oder Proben an uns liefern. | |
Qualitätszertifikat: | ISO9001: 2000 | |
Prüfqualität System: | ISO-Standard, 100% Voll Inspektion durch die Produktion. | |
Ausrüstung: | Härteprüfung, Drehmoment-Test, Salzsprühtest Dauertest, mechanische Größen Test, Zertifizierung und etc nach Ihrem Bedarf. | |
Prüfprozess: | Eingangskontrolle → Prozessqualitätskontrolle → abschließende Qualitätskontrolle → Vorversandkontrollen Qualitätskontrolle |
Standard |
Größe |
Breite über Ebenen |
Länge |
DIN6334 |
M4 |
7mm | 12mm |
M5 |
8mm | 15mm, 20mm | |
M6 |
8mm, 9mm, 10mm | 10mm, 15mm, 18mm, 20mm, 25mm, 30mm, 40mm | |
M7 |
9 mm, 11 mm | 15mm, 21mm, 25mm | |
M8 |
11mm, 12mm, 13mm, 14mm | 20mm, 24mm, 25mm, 28mm, 29mm, 30mm, 32mm, 40mm, 50mm | |
M9 |
11mm | 19mm | |
M10 |
13mm, 14mm, 17mm, 19mm | 20mm, 21mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm | |
M11 |
14mm | 24.5mm | |
M12 |
17mm, 19mm, 22mm | 20mm, 25mm, 30mm, 35mm, 36mm, 40mm, 45mm, 48mm, 50mm, 70mm | |
M13 |
17mm | 29mm | |
M14 |
19mm, 21mm, 22mm | 24mm, 25mm, 30mm, 38mm, 40mm, 42mm, 56mm | |
M15 |
19mm | 32mm | |
M16 |
22mm, 24mm | 30mm, 40mm, 48mm, 50mm, 60mm, 70mm | |
M18 |
27mm | 54mm | |
M20 |
30mm | 38mm, 50mm, 60mm, 80mm | |
M22 |
32mm | 66mm | |
M24 |
36mm | 50mm, 72mm, 80mm, 96mm | |
M27 |
41mm | 81mm | |
M30 |
46mm | 60mm, 90mm, 120mm | |
ANSI B18.2.2 |
1/4 " |
3/8 ", 7/16" | 13/32 ", 3/4", 7/8 ", 1" |
5/16 " |
3/8 ", 7/16", 15/32 ", 1/2" | 13/32 ", 7/8", 1 ", 1-3 / 16", 1-9 / 16 ", 1-3 / 4" | |
3/8 " |
1/2 ", 9/16", 5/8 " | 1 ", 1-1 / 8", 1-3 / 16 ", 1-9 / 16", 1-3 / 4 ", 2" | |
7/16 " |
5/8 ", 11/16" | 1-3 / 4 " | |
1/2 " |
5/8 ", 3/4", 11/16 ", 3/4" | 19/32 ", 1-1 / 4", 1-1 / 2 ", 1-9 / 16", 1-3 / 4 ", 2" | |
5/8 " |
1/2 ", 3/4", 13/16, "15/16" | 1 ", 1-3 / 16", 1-1 / 2 ", 1-29 / 32", 2 ", 2-1 / 8" | |
3/4 " |
15/16 ", 1", 1-3 / 32 " | 1-1 / 4 ", 2", 2-1 / 4 ", 2-1 / 2", 2-9 / 16 " | |
7/8 " |
1-1 / 8 ", 1-1 / 4", 1-5 / 16 " | 1 ", 1-3 / 32", 1-1 / 8 ", 2-1 / 4", 2-1 / 2 " | |
1 " |
1-1 / 4 " | 2-1 / 2 " | |
1-1 / 8 " |
1-5 / 8 ", 1-11 / 16" | 1-1 / 2 ", 3" | |
1-1 / 4 " |
1-5 / 8 " | 3" | |
1-1 / 2 " |
2 " | 4 " |
Plain, verzinkt, gelb verzinkt, schwarz verzinkt, Messing vernickelt, Cadmium, Geomet, Dacromet, HDG, Nylok, Black-Oxide, Vernickeln, Phosphatieren, Pulverbeschichtung und Elektrophorese.