盛仕达 钢铁 股份有限公司


Krótki opis:

  • Słowa kluczowe: Koncentryczny reduktor, reduktor mimośrodowy
  • Rozmiar: NPS od 3/4 '' do 48 '', DN od 20 do 1200, WT: 2-80mm, SCH 40/80 / XXSS
  • Promień gięcia: R = 1D ~ 10D, 15D R = R = 20D
  • Materiały i standardowe: stal węglowa --- ASTM A234 WPB / WPC ASTM A105 / A106 / A53 / A283 D API 5l GR.B / A671-CC-70 / A515-50 /-A A135 / A179-C; Stal nierdzewna --- ASTM 403 304 / 304L, 316 / 316L, 316Ti, 321,317L, 310S; Stal stopowa --- ASTM 234 WP 1/5/9/11/12/22/91
  • Koniec: Square Ends/Plain Ends (Straight Cut, Saw Cut, Torch Cut), Beveled/Threaded Ends
  • Dostawa: Within 30 Days and Depends on Your Order Quantity
  • Pakowanie: Pakowane w drewniane kabiny / Tray Wood
  • Zastosowanie: For Conveying Gas, Water and Oil Either in the Oil or Natural Gas Industries
  • Szczegóły produktu



    Malowanie & Coating

    Pakowanie i Ładowanie

    A steel pipe reducer is a component used in the pipelines to reduce its size from large to small bore in accordance to the inner diameter. The length of the reduction here is equal to an average of the smaller and larger pipe diameters. Here, the reducer can be used as  a nozzle. The reducer helps in meeting the existing piping of varied sizes or hydraulic flow of the piping systems.






    1. Pipe Reducer Material Types

    Carbon Steel Reducer vs Stainless Steel Reducer

    The reducers can be made of Carbon Steel, Alloy, or Stainless steel and much more. In comparison to the Stainless Steel Reducer, Carbon Steel Reducer possesses high-pressure resistance, higher strength, and wear resistant but this can be easily corroded.

    Carbon Steel Reducer material standards and grades:
    WPB A234, A420 WPL6, MSS-SP-75 WPHY 42, 46, 52, 56, 60, 65 i 70.

    For Stainless Steel Reducer: 
    ASTM A403 WP 304, 304L, A403, 316, 316L, 317, 317L, 321, 310 i 904L, etc.

    For Alloy Pipe Reducer: 
    A234 WP1, WP5, WP9, WP11, WP22, WP91 etc.


    2. Reducer Types

    There are two types of reducer, concentric reducer and eccentric reducer.

    Koncentryczny reduktor

    This reducer consists of the symmetrical and conical shaped fittings that enlarge or reduce the diameter equally about the center line. For an example, when 1” pipe transitions to ¾” pipe, then the top or bottom of the pipe do not remain level. It is widely used when single or multiple diameter changes.

    Eccentric Reducer

    A conically shaped fitting that reduces or enlarges the diameter, but it is not symmetrical about the center line. This is used in pipe-work systems for reducing the diameter of a pipe from one size to larger or small size.

    Concentric Reducer vs Eccentric Reducer Differences

    Concentric reducers are widely used while eccentric reducers are applied to maintain the top and bottom pipe level. Eccentric Reducers also avoids trapping of air inside the pipe, and Concentric Reducer removes noise pollution.


    3. Manufacturing Process of Steel Pipe Reducer

    There are versatile manufacturing processes for the reducers. These are made of welded pipes with the required filling material. However, EFW and ERW pipes cannot use the reducer. To manufacture forged parts, different kinds of methods are used including cold and hot forming processes. It includes the ‘Outer Die Method.’

    4. Outer Dia Method

    It is the most common method for manufacturing the steel pipe reducer. The pipe is cut and pressed in the outer die whereas, one end of the pipe is compressed into the smaller size. This method is fit for manufacturing small and medium-size reducers.

    5. Connection Types of Pipe Reducer

    Ranges from different connection types, pipe reducer could be classified with socket weld reducer and butt weld reducer.

    Socket Weld Reducer vs Butt Weld Reducer

    Socket weld reducer also called socket weld insert, it has three types 1, 2 and 3. Manufacturing standards comply to ASME B16.11.

    The Socket Weld resists ½ of the strength of butt welding, so it is used for small-diameter pipes possessing a diameter of NPS 2 or less. Butt Weld has good strength, as it is suitable for high pressure and temperature pipelines.

    Butt weld reducer ends in plan or beveled, manufactured in accordance with ASME B16.9 and welding process according ASME B16.25.


    6. Applications of Steel Pipe Reducer
    The usage of a steel reducer is carried out in the chemical factories and power plants. It makes the piping system reliable and compact. It safeguards the piping system from any kind of adverse impact or thermal deformation. When it is on the pressure circle, it prevents from any type of leakage and is easy to install. The nickel or chrome coated reducers extends the product life, useful for high vapor lines, and prevents corrosion.


  • Poprzedni:
  • Dalej:

  • Rura redukcyjna, reduktor Armatura

    Redukcje ze stali rur dostępne są koncentrycznych i ekscentrycznych typów. Reduktory rur są odpowiednie składniki w rurociągach, które zmniejszają rozmiar rur od dużych do małych otworów. Końce wlotowe i wylotowe reduktorów rur stalowych i rur ze stopów reduktorów dostosowania do wspólnej linii środkowej.

    Reduktor-02 Reduktor-03

    Reduktory mogą być wykonane ze stali węglowej, stopowej, lub ze stali nierdzewnej i wiele więcej. W porównaniu do stali nierdzewnej Reduktor, stal węglowa Reduktor posiada wysoką odporność ciśnienia, większą wytrzymałość i odporność na ścieranie, ale można to łatwo skorodowane.

    Stal węglowa Reduktor normy materialne i stopnie:

    WPB A234, A420 WPL6, MSS-SP-75 WPHY 42, 46, 52, 56, 60, 65 i 70.

    Stali nierdzewnej Reduktor:

    ASTM A403 WP 304, 304L, A403, 316, 316L, 317, 317L, 321, 310 i 904L, etc.

    Dla rur ze stopu Reduktor:

    A234 WP1, WP5, WP9, WP11, WP22, WP91 etc.


    Smarowanie światło, czarny obraz

    Reduktor-01 Reduktor-02 Reduktor-03

  • We use cookies to offer a better browsing experience, analyze site traffic, and personalize content. By using this site, you agree to our use of cookies.