SHINESTAR STEEL GROUP CO., LTD

盛仕达 钢铁 股份有限公司

간단한 설명:


  • 키워드 : 파이프 엔드 캡, 파이프 스틸 캡, 표준 스틸 파이프 캡, 강한 스틸 파이프 캡
  • 크기 : '48'1/2 NPS ', 12 1200 DN, WT : 2~80mm, SCH 80분의 40 / XXS
  • 재질 : 탄소강 --- ASTM A234 WPB ANSI B 16.9, DIN 2606 N -5- ST.37.0; 스테인리스 ASTM 403 --- 304 / 304L, 316 / 316L, 316Ti, 321,317L, 310S, 합금강 --- ASTM A234에서의 WP 5분의 1 / 9 / 12분의 11 / / 22 91Bend 반경 : 2.5D / 3D / 4D / 5D / 6D / 7D / 8D / 9D / 10D
  • 배달 : BKS, NBK, BK, BKW, GBK (+ A), NBK (+ N) BK (+ C)
  • 포장 : / 나무 쟁반 나무 산장에 포장
  • 응용 프로그램 : Petroleum, Electricity, Chemicals, Natural Gas, Construction, Shipbuilding And Other Fields Because Of Its High Pressure, High Temperature, Etc
  • 제품 상세 정보

    사양

    표준

    도장 및 코팅

    포장 및 컨테이너

    Pipe Caps act as protective device and are designed to protect pipe ends of various shapes. The main purpose of using pipe caps is to waterproof the connections. They are also used to close the the ends of hydraulic or pneumatic pipes and tubes. They are used in the plumbing apparatus of domestic, commercial and industrial water supply lines, machinery and processing equipment etc. They are also fitted on water pump lines with the sole purpose of removing air blocks. Pipe caps are highly demanded as an important category of pipe fittings.Steel Pipe Cap is also called Steel Plug, it usually welded to the pipe end or mounted on the external thread of the pipe end to cover the pipe fittings. To close the pipeline so the function is the same as the pipe plug.

     

    Types of Pipe Caps:

    파이프 캡은 다양한 종류에 와서 유형은 응용 프로그램에 따라 다릅니다. 그러나 파이프 캡은 또한 건설 기능에 따라 다양하며, 구매자가 관 뚜껑의 오른쪽 유형을 알고하는 것이 매우 중요합니다. 건설을 바탕으로, 파이프 캡의 유형은 다음과 같습니다

    나사 캡 :
    These caps are female threaded. The thread can be either straight or tapered, also referred as NPT. Generally, caps have a female thread and plugs have a male thread.

    테이퍼 캡 :
    These caps have tapered sides, which offers a close fit. Some of these fittings can be used either as a cap or a plug. Tapered caps and plugs are multi-functional and go well with male and female NPT threads, straight tubes and bars; and male straight threads. These fittings have a tapered body to provide a secure and firm friction fit while facilitating easy removal. The tapered caps are designed to provide protection for all internal and external, threaded and non-threaded fittings against damage, dirt or moisture that can occur.

    Anti-Roll Caps:
    These caps are round in shape with a slightly square end. This prevents pipes and tubes from rolling.

    BW Steel Cap:

    BW steel pipe cap is the butt weld type of fittings, connecting methods is to use butt welding. So BW cap ends in beveled or plain.

    Socket Weld Steel Pipe Cap

    Socket weld cap is to connecting pipes and caps by insert the pipe into the access shoulder area of the socket weld cap.

     

    Pipe Cap Material Grades

    Stainless Steel Pipe Cap ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    Carbon Steel Pipe Cap ASTM A 234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    Low Temperature Carbon Steel Pipe Cap ASTM A420 WPL3, A420 WPL6
    Alloy Steel Pipe Cap ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    Duplex Pipe Cap ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Werkstoff No. 1.4462
    Nickel Alloy Pipe Cap ASTM / ASME SB 336 UNS 2,200 (NICKEL 200), UNS 2,201 (NICKEL 201), UNS 4400 (MONEL 400), UNS 8020 (ALLOY 20분의 20 CB 3 UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600) UNS 6,601 10,276 (276 HASTELLOY C) (INCONEL 601), UNS 6625 (INCONEL 625), UNS

     

     


  • 이전 :
  • 다음 :

  • 표준 : ASME / ANSI - B 16.9, ASTM A403 - ASME SA403, ASME의 B16.9, ASME B16.25, ASME B16.28, MSS SP-43.

    크기 : ANSI B16.9 된, ANSI B16.28, MSS-SP-43 타입 A, MSS-SP-43 타입 B, JIS B2312, JIS B2313의

    Size : Seamless Reducer ( 1/2″~24″), ERW / Welded / Fabricated Reducer (1/2″~48″)

    두께 : 일정 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS 등

    형태 : 파이프 엔드 캡, 파이프 캡, 엔드 캡.

    유형 : 원활한 / 용접 / 날조

    END는 치수를 CAPS :

    캡-01

    ANSI 16.9 치수 BUTTWELD 엔드 캡

    신장

    mm

    신장

    이자형

    1/2

    15

    21,34

    25,40

    3/4

    20

    26,67

    31,75

    1"

    25

    33,40

    38,10

    1 1/4

    32

    42,16

    38,10

    1 1/2

    40

    48,26

    38,10

    2

    50

    60,32

    38,10

    2 1/2

    65

    73,02

    38,10

    3

    80

    (88, 90)

    50, 80

    3 1

    90

    101,60

    63,50

    4

    100

    114,30

    63,50

    5

    125

    141,30

    76,20

    6

    150

    168,27

    (88, 90)

    8

    200

    219,07

    101,60

    10

    250

    273,05

    127,00

    12

    300

    323,85

    152,40

    14

    350

    355,60

    165,10

    16

    400

    406,40

    177,80

    18

    450

    457,20

    203,20

    20

    500

    508,00

    228,60

    22

    550

    558,80

    254,00

    24

    600

    609,60

    266,70

    28

    700

    711,20

    266,70

    mm의 치수

    ANSI 16.9 공차

    치수 공차 - CAPS

    모든 피팅

    공칭 파이프 크기 (NPS)

    베벨에서 Ø 외부

    끝에 Ø 내부

    벽 두께
    t / t1

    전체 길이 E

    1/2 2 1/2

    1

    0,8

    아니

    4

    3 3.5

    1

    1,6

    적게

    4

    4

    이 -1

    1,6

    보다

    4

    5 6

    +3 -1

    1,6

    87,50 %

    7

    8

    2

    1,6

    명목상의

    7

    10

    4 -3

    3,2

    tickness

    7

    12 18

    + 4-3

    3,2

     

    7

    20 24

    + 6-5

    4,8

     

    7

    26 30

    +7 -5

    4,8

     

    10

    32 48

    +7 -5

    4,8

     

    10

    맞대기 용접은 CAPS - 무게

    피팅의 무게

    NPS의
    신장

    CAPS

    모델명 : SCH.
    5S

    모델명 : SCH.
    10S

    모델명 : SCH.
    40S

    모델명 : SCH.
    80S

    1/2

    0.04

    0.04

    0.05

    0.05

    3/4

    0.05

    0.05

    0.06

    0.08

    1

    0.09

    0.09

    0.13

    0.17

    1 1/4

    0.11

    0.11

    0.15

    0.18

    1 1/2

    0.15

    0.15

    0.20

    0.22

    2

    0.17

    0.17

    0.25

    0.30

    2 1/2

    0.25

    0.25

    0.45

    0.50

    3

    0.40

    0.40

    0.70

    0.90

    4

    0.60

    0.60

    1.20

    1.60

    5

    1.00

    1.00

    1.90

    2.70

    6

    1.40

    1.40

    2.90

    4.30

    8

    2.50

    2.50

    5.10

    7.60

    10

    3.90

    3.90

    9.00

    12.0

    12

    6.50

    6.50

    13.5

    17.5

    14

    8.00

    8.00

    16.0

    20.5

    16

    14.5

    14.5

    20.5

    26.0

    18

    17.0

    17.0

    26.0

    34.0

    20

    18.0

    18.0

    32.0

    43.0

    24

    26.0

    26.0

    46.0

    60.0

    대략 kg의 중량 밀도 8kg / DM3

    스테인리스 끝 파이프 캡 : ASTM A403 WP316 / 316L, ASTM A403 WP304 / 304L, ASTM A182 F316L, 304L, DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404

    합금 강철 끝 파이프 캡 : ASTM / ASME A / SA (234) 할머니. WP 1, WP 5 WP 9 WP 11 WP 12 WP 22 WP 91

    듀플렉스 및 슈퍼 듀플렉스 스틸 끝 파이프 캡 : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. UNS S32750, S32950. Werkstoff 번호 1.4462

    탄소강 파이프 엔드 캡 : ASTM A 234 WPB, WPBW, WPHY 42 WPHY 46 WPHY 52 WPH 60 WPHY 65 WPHY 70.

    니켈 합금 최종 파이프 캡 : ASTM / ASME SB 336 UNS 2,200 (NICKEL 200), UNS 2,201 (NICKEL 201), UNS 4400 (MONEL 400), UNS 8020 (ALLOY 20분의 20 CB 3 UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600), UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10,276 (HASTELLOY C (276)).

    빛 도유, 블랙 도장

    표면 처리:

    투명 기름, 녹 방지 검은 기름이나 뜨거운 아연 도금.

    엄격 2000 : 특수 설계 사용할 수있는 모든 생산 과정은 ISO9001에 따라 만들어진다.

    다른 재료에 기초하여, 배관 캡 등 탄소강 캡 스테인리스 캡 및 합금강 캡을 포함

    자신의 건설에 따라, 파이프 캡은 캡, 테이퍼 캡 및 안티 - 롤 캡 등을 스레드 포함

    엔드 캡과 같은 우리의 제품은 운송 전반에 걸쳐 손상이 없다는 것을 확인하기 위해 포장됩니다. 다만 수출의 경우, 통상적 인 수출 포장은 나무 상자 또는 경우에 완료됩니다. 모든 엔드 캡이 상표 (회사의 로고)가 표시되어, 학년, 요청에 크기와 로트 번호는 우리가 정의 우리의 제품에 표시 할 수 있습니다. 

    캡의 포장

  • We use cookies to offer a better browsing experience, analyze site traffic, and personalize content. By using this site, you agree to our use of cookies.

    Accept